Magnetic filter

The stainless steel magnetic filter is composed of a magnetic rod group and a stainless steel cylinder. It uses the powerful magnetic field generated by the magnetic rods to filter out fine iron impurities in liquids, slurries, powders, gases and other materials conveyed by air pipelines. Common types include flange type, quick-installation type, etc.

Features

Strong magnetic force: The surface magnetic height can reach up to 10,000 Gs, and the magnetic force is 5 to 20 times higher than that of similar conventional magnetic materials (ferrite or alnico permanent magnetic materials). It has a good iron removal effect and can remove tiny particles ranging from 0.5 to 60μm that are difficult to see with the naked eye.
Material safety: High-quality stainless steel materials such as SS304 and SS316 are selected. Surface treatments include mirror polishing, brushed polishing, sandblasting, etc., which can meet food grade and hygiene grade standards. It is corrosion-resistant, has high strength and good toughness, and can adapt to various harsh working conditions, ensuring the long-term stable operation of the equipment.
Easy to clean: When cleaning, unscrew the drain plug at the bottom of the main pipe to drain the fluid, remove the flange cover, take out the filter screen or magnetic rod for cleaning, and then reinstall it for continued use. When cleaning some quick-installation filters, first loosen the clamping screws on the cover, remove the sleeve cover component, pull out the magnetic rod, and the adsorbed iron impurities will fall off automatically. After cleaning, reinstall the sleeve into the cylinder, tighten the clamping screws, and then insert the magnetic rod cover.
Low operating cost: It does not consume energy during operation, has no moving parts, a long service life, and extremely low magnetic force attenuation. For instance, the attenuation of some products is only 1% within 10 years.

"Application

It is widely applied in industries such as chemical engineering, pharmaceuticals, pigments, dyes, food, metallurgy, ceramics, petrochemicals, refrigeration, and plastics. It is used to separate the fine iron filings contained in liquid media, reduce the iron ion content in products, improve product quality, protect the accessories on equipment pipelines from wear and blockage, and ensure the normal operation of equipment.